Products Comparison

Share this page: WhatsApp Share Button

2-Channel Power Amplifier


2-Channel Power Amplifier


Type of Power Transformer Power Amplifier
Mounting 2U
LCD Display Yes. To show input level, temperature, voltage
Protection Function DC safeguard, overheat, clipping, overload, short circuit protection
Ground Switch Yes
Switching Mode Stereo, Bridge, Mono
Input Sensitivity Switch Yes
Ventilation Fan Yes
Low Cut VR at Front Panel No
Crossover VR at Front Panel No
Phase VR at Front Panel No


Output Power 2 x 750 Watts (8Ω) 2 x 1120 Watts (4Ω)
Bridge Output Power (RMS) 2240 Watts (8Ω) 3000 Watts (4Ω)
Frequency Response 5Hz-50kHz ± 0.5dB (8Ω 1 Watt)
Signal to Noise Ratio >103dB
Total Harmonic Distortion <0.05%
Damping Factor >400
Crosstalk >75dB
Slew Rate >40V/us
Input Sensitivity 0.7V / 1.0V / 1.44V
Input Impedance 20kΩ balanced, 10kΩ unbalanced
Voltage Gain (8Ω) N/A
Output Circuitry N/A
Air Cooling Direction Air flow from rear to front
AC Input 115V / 230V 50Hz ± 10%
Panel Indicator Power (Blue), Signal (Green), Clip (Red), Protect (Yellow)
Front Panel Function Power switch, volume control
Back Panel Function Operation, sensitivity, hi/low pass, grounding, sub freq and volume control
Mode Selection Stereo, Bridge, Parallel
Input Connectors XLR plug connector
Output Connectors Banana plug and speakon plug connector
Product Dimension (W x H x D) 482mm x 89mm x 453mm
Packing Dimension (W x H x D) 570mm x 150mm x 570mm
Net Weight / Gross Weight 26.0kg / 27.5kg
Set Per Carton 1 set per carton